当前位置:PRODUCT
上一篇 | 已经是最后一篇

Patterned conveyor belt

2013/11/22 8:42:27    
更多


Patterned conveyor belt is composed of belt carcass and pattern, due to the delivery of materials and conveyor Angle size, pattern shape and height (depth) is also different. I plant production of

Products are: decorative pattern conveyor belt, ring belt, heat resistant conveyor belt, etc.

Pattern with 0 ° and 30 ° obliquity conveying material, have what ordinary conveyor belt does not have big friction and conveying ability strong advantage. To be able to get a very good customer in the process of conveying material decline due to the increase of Angle, especially when transporting bulk effect is more obvious.

The component of product:

Patterned conveyor belt is covered with face to the pattern of glue and the working face of flat rubber covered with core constitute the inclination of the conveyor belt.

Product features: suitable for Angle of 0 ~ 40 ° material conveying, to prevent slipping.

Pattern: the herringbone, pit type, U type, stripe pattern, grainy, fan pattern

The width of the baseband: B400 ~ 1400 mm

The height of the decorative pattern:,10,15,20,25 5 mm

Product categories:

Font pattern

Characteristics: there are higher than the belt body on the surface of the "people" word pattern, pattern but speak but closed, and each kind of decorative pattern can be divided into high, medium and low three.

USES: applicable to 40 degrees or less inclination of powder, granule, small piece of material transportation, can also be packaged material.

The stripe pattern

Features: the horizontal bar is higher than the belt body on the surface of decorative pattern, decorative pattern is divided into high, medium and low three, each pattern according to the arrangement spacing can be divided into thin and dense form.

Usage: apply to the levels of 30 degree Angle or less transport packaging. If under the condition of into a trough, can replace the herringbone pattern.

grainy

Characteristics: there are higher on the surface of belt body or concave embedded with grainy, also pits can be made into square hole shape or prismatic and cloth grain shape.

Purpose: convex granular pattern suitable for soft packing material or need to have a grasp on conveying, such as cardboard boxes or without sliding conveying.

Pit shape of granular pattern is suitable for the 45 degree Angle or less granular material conveying.

The fan pattern

Characteristics: a half on the surface of the fan (or 1/4 circular) pattern. When the tape into the groove pattern interference scallop (or semicircle), is a high pattern classes.

Usage: apply to 60 degrees or less big obliquity conveying powder, particles and block material.
 
 
上一篇 | 已经是最后一篇