当前位置:NEWS

Conveyor belt maintenance and description.

2013/11/21 16:51:14    
更多

1, the conveyor belt in the transport and storage of species, the value should be kept clean to avoid the sun radiation or rain, snow cream dip, prevent acid, alkali oils, organic solvents and other substances in contact, and one meter away from the heating device.

2, storage temperature should be maintained when the storage -18 ℃ - 40 ℃, relative temperature should be maintained at between 50-80% RH.

3, the storage period, the product must be placed into a roll, not folded, place the period should be turned over once every quarter.

4, different types, specifications should not be connected together layers of conveyor belt use, the connector preferably bonding method.

5, the conveyor belt of the type, structure, size, number of storeys shall use reasonable choice.

6, the conveyor belt speed generally not large and 2.5 m / s, block degree, abrasive materials and the use of large fixed-plow-type discharge device should maximize the use of low speed.

7, the transport of the drive pulley diameter and belt fabric layer off first, passed down roller, bend the supporting roller and the roller groove angle of the transport requirements of the design requirements should be based on reasonable selection.

8, feed should be directed to run the tape along the direction of the material to reduce the impact of the whereabouts of the tape should be used chute, reduce the falling distance; tape feeding section should be shortened by the distance between rollers and the use of buffer roller, to prevent leakage, with a side of the block should be used moderately soft plate in order to avoid blocking plate mark, scratch the conveyor belt surface.

9, the conveyor belt in use should note the following:

(1) to avoid roller covered by material, resulting in rotation not working, to prevent leakage of material between the cards in the drum and the belt, pay attention to the lubrication of moving parts, but not oil belt;

(2) to avoid starting with a load;

(3) tape deviation occurs, it should take timely measures to correct;

(4) found that local action should be timely repair tape, so as not to expand;

(5) to avoid being tape rack, post or block material block to prevent the misfortune to scratch the rip